Datwyler enhances surface and analytical support with new Technology & Innovation Labs
News | July 20, 2022
Datwyler has launched new, dedicated Technology & Innovation (T&I) Labs in Schattdorf, Switzerland, comprising a series of specialist laboratories, to further support customers globally.
The new T&I Labs feature the latest, state-of-the-art equipment, which will drive the development of breakthrough, innovative products and also the improvement of existing products through advanced root cause analysis. Often, the interpretation of data is a challenge to customers. By combining Datwyler’s extensive material expertise with the capabilities of the labs it is possible to analyze the interaction between materials, to optimize their properties and to control the processes for the highest quality outcomes.
The T&I Labs offer customers the ability to use our expertise and equipment to find the ideal solution for their problem or co-engineer an entirely new product together with us. Since our T&I Labs are entirely in-house, we offer complete independence, transparency, and flexibility at every stage of the development process. This enables us to take total ownership of material quality, process control, and analysis. We are able to develop, together with our customers, the best functionality and material combination for their products, and because the labs are independent, we can do so without affecting production schedules in any way.
Head of Mixing and Lab Technologies
Customers gain strategic advantages via advanced analytical methods
The ability to characterize and analyze surfaces and the contact between different materials provides a strategic advantage to Datwyler’s customers. From recipe development to advanced technologies, it is possible to start from scratch with new materials, combinations and processes and then to go into how to implement them into production. Existing parts can also be used for experiments to develop new coatings and processes independently. This means, for example, when a new bonding agent is required, now the fine-tuning of the bonding agent application can be done in parallel without stopping production – offering much more flexibility to customers.
The labs also enhance the ability to analyze and optimize the manufacturing process and the functionality of a component within a system in a situation that is as close to reality as possible.
What we have created at the T&I Labs that is truly unique as a cleanroom environment. We are able to recreate very similar conditions to the production environment, which allows us to prototype in these rooms, and we can do many iterations, tests and experiments to achieve the highest quality solutions. This not only makes the integration time shorter, but it also means the feedback loop is much faster, enhancing speeds-to-market for our customers.
Luciane Klafke
The future of mobility requires advanced capabilities
Haptic feedback and morphing buttons powered by EAP technology
As mobility applications continue to move forward, advanced technologies will require greater functionality in terms of materials and surface treatments. Sealing solutions must perform at the highest level, but may also be required to perform in other ways given their new environment, such as maintaining temperature stability. Highly advanced electroactive polymers (EAP) are also a good example. Their use in stacked actuation technologies for electrification and electric vehicles has led to advances such as haptic feedback and morphing buttons within the cabin interior, as well as lower energy consumption and reduced mechanical complexity when compared to today’s actuators.
Functionality is a core focus in terms of innovation, and there are many challenges we must address. Certain coatings, for battery cells for example, will require a material that is thermally conductive and electrically insulating with EMI shielding, and these are qualities that are often contradictory. Improving conductivity increases shielding efficiency, but sometimes this is not required, and a coating must be added to counter the effects. Because the functionality of materials is not visible u2013 you have to make it visible through testing to achieve the desired results. The new Technology & Innovation Labs will be instrumental here in these instances and will, we are sure, become the go-to global competence resource for surface technologies and future-oriented material solutions.
Head of Material Development
Unique project ETEMI™ aims to create a material matrix for new mobility applications with 360 degree in-house support – from design and development to testing and industrialization.
Unique project ETEMI™ aims to create a material matrix for new mobility applications with 360 degree in-house support – from design and development to testing and industrialization.
Enquiries
Guido Unternährer
VP Financial Communication & Investor Relations
Dr. Luciane Klafke
Head of Mixing and Lab Technologies
Provided downloads
The state-of-the-art equipment promotes the development of future-oriented surface technologies and material solutions.
jpg,
4.31 MB (EN)
The Technology and Innovation Labs accelerate the development process and enhance speed-to-market for customers.
jpg,
262.44 KB (EN)
